HyperCarbon film roll with visible gloss carbon twill weave, unrolled over a dark body panel

HyperCarbon Carbon PPF Gloss

TPU paint protection film with a glossy carbon look — 190 µm.

82.95 € / m incl. VAT · = 54.57 € / m² (at 152 cm width) Prices incl. VAT as of July 2026 — the current price in the TipTopCarbon shop applies.
Buy at TipTopCarbon ↗

Note: TipTopCarbon is a German-language shop.

Manufacturer warranty for wrap shops For business customers (§ 14 BGB): 5-year manufacturer warranty on the film material — metal warranty card included, register the vehicle. Go to trade registration →

HYPERTIX DOES NOT SELL DIRECT — SALES VIA TIPTOPCARBON.

IN DETAIL

What sets HyperCarbon Carbon PPF Gloss apart

HyperCarbon is a TPU paint protection film with a carbon look and a glossy surface. It is not real carbon, but a film that gives the part a carbon look.

Like all HYPERTIX paint protection films, it is 190 µm (7.5 mil) thick and self-healing according to Hypertix. It is supplied by the metre from the 152 cm wide roll.

EXPERIENCE THE TECHNOLOGY

Self-healing & surface

Macro shot: flawless black high-gloss paint after heat activation Macro shot: black high-gloss paint with fine car wash scratches MICRO SCRATCHES · TOPCOAT AMBIENT TEMPERATURE
Micro scratches visible in the topcoat layer.

Hydrophobic topcoat: water beads off instead of drying on.

TECHNICAL DATA

Data & specifications

Material Thermoplastic polyurethane (TPU)
Total thickness 190 µm
Thickness (mil) 7.5 mil
Surface Gloss, carbon look
Roll width 152 cm
Application Wet application
Self-healing Yes (according to Hypertix)
PACKAGING

How the roll arrives.

1.58 m shipping box with the claim “Protection without compromise.” — the roll sits edge-protected inside the fully printed box, ready for the workshop shelf.

HERSTELLERANGABEN (GPSR)
Verantwortlicher Wirtschaftsakteur
TipTopCarbon GmbH · Im Lindental 48 · 58135 Hagen · Deutschland · E-Mail: jeromewitzki@gmail.com
Produktkennung
Art.-Nr.: HPX-CRB-112G
Sicherheitshinweise
Warn- und Sicherheitshinweise: siehe Produktkennzeichnung auf der Verpackung.
INSTALLATION

How the work is done

  1. 01
    Prepare the part Clean, degrease and check the edges.
  2. 02
    Set the direction Take all cut pieces from the roll in the same direction so the pattern runs the same way on adjacent parts.
  3. 03
    Apply wet Position with application solution and squeegee out with a PPF squeegee.
FAQ

Frequently asked questions

Is this real carbon?

No. HyperCarbon is a TPU paint protection film with a carbon look.

How thick is the film?

190 µm (7.5 mil), like all HYPERTIX paint protection films.

GOES WITH IT

Matching products