HyperMirror One-Way Mirror Film
Silver-mirrored one-way film for the outside of the window.
Note: TipTopCarbon is a German-language shop.
HYPERTIX DOES NOT SELL DIRECT — SALES VIA TIPTOPCARBON.
What sets HyperMirror One-Way Mirror Film apart
HyperMirror is a silver-mirrored one-way window film that is applied to the outside of the glass. It is supplied by the metre from the 152 cm wide roll.
A mirrored film always mirrors towards the brighter side. By day, when it is brighter outside than inside, you see the mirror from outside, while the view out from inside stays clear. At night this reverses: with the light on inside, people can see in from outside.
The right tool for the job: WindowTool installation squeegee — all products at a glance.
Data & specifications
| Colour | Silver mirrored |
|---|---|
| Installation side | Exterior side |
| Roll width | 152 cm |
- Verantwortlicher Wirtschaftsakteur
- TipTopCarbon GmbH · Im Lindental 48 · 58135 Hagen · Deutschland · E-Mail: jeromewitzki@gmail.com
- Produktkennung
- Art.-Nr.: HyperMirror99XC-152
- Sicherheitshinweise
- Warn- und Sicherheitshinweise: siehe Produktkennzeichnung auf der Verpackung.
How the work is done
- 01 Clean the glass Clean the glass thoroughly with cleaner and a squeegee, wipe out the frame edges.
- 02 Cut with excess Cut the film slightly larger and only trim it flush after installation.
- 03 Apply wet Spray the glass and the adhesive side well, place the film and align it.
- 04 Squeegee out the water Work from the centre to the edges with the squeegee, then trim the edges.
Frequently asked questions
Does the mirror effect also work at night?
No. At night, with the light on, it is brighter inside than outside — then people can see in from outside. The mirror always faces the brighter side.
Install inside or outside?
HyperMirror is applied to the outside of the glass.
