HyperScraper Plastic Scraper
Scrapes away adhesive and stickers — not the paint.
Note: TipTopCarbon is a German-language shop.
HYPERTIX DOES NOT SELL DIRECT — SALES VIA TIPTOPCARBON.
What sets HyperScraper Plastic Scraper apart
Metal blades remove adhesive residue quickly — and like to leave scratches that cost more than the whole job. The HyperScraper instead relies on a polycarbonate blade: hard enough to get under dried adhesive residue, stickers and vignettes, soft enough to leave paint, glass and film surfaces unharmed.
The orange blade can be used on both sides and sits in a black soft-touch handle that does not slip even in wet work. When the edge is spent, it is turned around or replaced in seconds via the change system — matching spare blades come in packs of 10. At 9.7 cm long, the scraper fits any tool bag and is standard kit for wrappers, detailers and sign makers.
Built for working with the HyperPROtect TPU paint protection film — more about the film technology.
Data & specifications
| Material | Polycarbonate blade, soft-touch handle |
|---|---|
| Length | 9,7 cm |
| Width | 3,8 cm |
| Blade | Usable on both sides, replaceable |
| Colour | Black / orange blade |
- Verantwortlicher Wirtschaftsakteur
- TipTopCarbon GmbH · Im Lindental 48 · 58135 Hagen · Deutschland · E-Mail: jeromewitzki@gmail.com
- Produktkennung
- Art.-Nr.: HPX-HyperScraper
- Sicherheitshinweise
- Warn- und Sicherheitshinweise: siehe Produktkennzeichnung auf der Verpackung.
How the work is done
- 01 Moisten the substrate Soak adhesive residue with cleaner or water — that halves the effort.
- 02 Apply flat Slide the blade under the adhesive at a flat angle; do not lever.
- 03 Turn/change the blade When the edge fades, flip the blade or swap it for a new one.
Frequently asked questions
Does the scraper really scratch nothing?
Polycarbonate is softer than glass and cured paint — at a flat angle and on a clean substrate, the surface stays unharmed. On fresh paint and piano black films, test in a hidden spot first.
Do other makers’ spare blades fit?
The HyperScraper spare blades (38 × 18 mm) are matched to the change system — we recommend the original spare blades in the pack of 10.
