HyperBomb Pressure Sprayer Tank 9.5L
Constant spray pressure from the stainless steel tank — no more pumping.
Note: TipTopCarbon is a German-language shop.
HYPERTIX DOES NOT SELL DIRECT — SALES VIA TIPTOPCARBON.
Available sizes
| Variant | Price | Unit price | Shop |
|---|---|---|---|
| HyperBomb 9.5 litres (41 × 21.4 cm) | 229.00 € | incl. VAT · — | To the shop ↗ |
| HyperBomb 19 litres (64.5 × 21.4 cm) | 269.00 € | incl. VAT · — | To the shop ↗ |
What sets HyperBomb Pressure Sprayer Tank 9.5L apart
Anyone doing large-area wet installations knows the ritual: pump, spray, pump again — and mid-panel the pressure drops. The HyperBomb ends it. The stainless steel pressure tank is filled once via the standard Schrader valve with a compressor and then delivers constant spray pressure until the tank is empty. No re-pumping, no pressure drop, no interruption in the workflow.
Two sizes cover the jobs: the 9.5-litre version (max. 5 L fill) stays compact and mobile, while the 19-litre tank (max. 10 L) supplies complete vehicle wraps or large glass fronts. The roughly 9-metre coiled hose gives freedom of movement around the whole vehicle without moving the tank.
The ball-valve stainless steel pressure tank takes up to 7 bar operating pressure and shrugs off workshop life where plastic sprayers have long given up. For PPF wet installation, window tinting and any application solution, it is the investment that pays for itself job by job.
Built for working with the HyperPROtect TPU paint protection film — more about the film technology.
Data & specifications
| Material | Premium stainless steel |
|---|---|
| Max. operating pressure | 7 bar |
| Dimensions | 41 x 21.4 cm (H x Ø) |
| Recommended fill volume | max. 5 L |
| Hose length | approx. 9 m coiled hose |
| Valve connection | Standard Schrader valve |
- Verantwortlicher Wirtschaftsakteur
- TipTopCarbon GmbH · Im Lindental 48 · 58135 Hagen · Deutschland · E-Mail: jeromewitzki@gmail.com
- Produktkennung
- Art.-Nr.: HPX-HyperBomb9-5
- Sicherheitshinweise
- Warn- und Sicherheitshinweise: siehe Produktkennzeichnung auf der Verpackung.
How the work is done
- 01 Mix the solution Mix application solution at the recommended ratio and fill up to the maximum fill volume.
- 02 Build up pressure Bring the tank to working pressure via the Schrader valve with a compressor (max. 7 bar).
- 03 Spray evenly Wet surfaces generously and evenly — the pressure stays constant over the entire fill.
- 04 Release after work Release residual pressure, empty the tank and rinse with clear water.
Frequently asked questions
9.5 or 19 litres — which size?
For mobile jobs and partial wraps the 9.5 L version is enough; businesses doing full wraps or large glass areas go for the 19 L tank with double the fill volume.
Do I need a compressor?
Yes — filling is via a standard Schrader valve (car tyre valve). Any workshop compressor and even a petrol station air pump works.
